How To Put Blinders On Windows

How to Install Window Blinds

Updated: Jun. 26, 2019

Blinds are practical, relatively inexpensive and very like shooting fish in a barrel to install. Simply follow these steps and you'll have your blinds installed in no time at all.

Instructions for how to install window blinds.

You might also like: TBD

Fourth dimension

A full day

Complexity

Beginner

Cost

Varies

Inside- or outside-mount?

Mounting brackets for blinds: Inside- or outside-mount?

Expect at your window and decide if you want to mountain the blinds on the within of the window frame (jamb) or outside and/or above the window frame. Inside-mounted blinds look tidy and that'due south the fashion to become in most situations. Outside mounted blinds cover upwards part of the frame and the mounting bracket holes volition prove if the brackets are removed at a later date. One compelling reason to go with outside mount is if the window frame is too shallow to conform the mounting brackets. If your window trim has holes from someone else's window hardware, here'southward how to fill up those holes quickly and easily.

Brand good choices

Make expert choices

Most mini blinds are fabricated of vinyl or aluminum. Forest and fake forest blinds are bachelor at a higher cost. As well, blinds come up either with a cord (for lowering and raising the slats) or without a string (slats are raised and lowered by moving the bottom rail upwards or downwards.) Corded shades are readily available and cordless may need to be special ordered. Cords are a gamble to young children, so cull the safer cordless option if kids will be around. If you lot have a grandparent or other seniors living with you, bank check out these xvi helpful tips for making your home safer for older people.

Measure and buy

Measure out and buy

If you've called to inside-mountain your blinds, measure out the width of the window infinite. Select a blind with a width that will fit inside the infinite. Don't go likewise narrow or you'll take gaps that reduce privacy and allow in likewise much calorie-free. For exterior mount, measure the width you'd like to encompass up and select a blind with that width. Virtually blinds come up in standard widths to fit mutual window sizes. Some blinds can exist custom-cut where you purchase them or, if you're not in a large bustle and you don't mind spending more, blinds can be custom-ordered to fit your dimensions.

Open the packet

Open the package

When you open the box, catch the instructions and run across what's supposed to exist included. Make certain it's all there earlier you do anything else. Also, exist sure you have a drill/driver (or screwdriver) and a pencil to mark the locations of the bracket holes.

Marker the subclass holes

Marking the mounting brackets for blinds holes

Concur the bracket in place to mark the holes. An inch or so from the edge is usually a safe spot for an inside mount, as shown, but look at your blinds and make sure the subclass won't interfere with the internal mechanisms of the blind. If your blind came with a template for the subclass holes, use that to marker them.

Drill pilot holes

Drill pilot holes

Drill pilot holes to make it easier to install the screws that agree the brackets.

Install the window bullheaded brackets

Install the brackets

Hold the window bullheaded brackets in place, line up the holes and install the screws. Echo with the second bracket. If you don't take a drill/driver, the screws can be installed with a screwdriver, but it takes longer and information technology may be very difficult, if not impossible, to install them with a screwdriver if the window frame is made of hardwood or metal.

Voila!

Voila!

Pop the end caps onto the tiptop rail of the blinds and then place the top runway into the brackets. The blinds shown here snap right onto the brackets. With some blinds, the top rail fits into the brackets and y'all snap down a little flap. Test the blinds to make sure they go upwardly and downward properly. All skilful? Step back and admire your work!

Install the tilt wand

Install the tilt want

Hook on the tilt wand and test to brand certain it tilts the slats up and down.

Cleats

Cleats

Plastic cleats were included with our blinds. Install them and you tin can wrap the cord around them when the blinds are pulled up.

Hold-down brackets

Hold-downwardly window blind brackets

Our blinds as well included these concord-down brackets. One time installed, you lot tin can go on the bottom rails hooked on the brackets and so the blinds won't flap around when the window is open on a breezy 24-hour interval. Wind tin can besides wreak havoc on your screen door. Repair a screen door hands with these simple steps.

Temporary solution

Temporary solution

What can you do if you need something to cover your windows right at present or you live in a building where you're not immune to drill holes in your walls or window frames? Temporary shades are the answer! They're very inexpensive, take only minutes to install (you but cut them to fit, peel off the adhesive protector strip and stick them up!) and they don't expect half bad! Plus, when you lot accept them down there's no damage to the surface underneath.

Originally Published: June 26, 2019

Similar Projects

Source: https://www.familyhandyman.com/project/how-to-install-window-blinds/

Posted by: thomasfraidess.blogspot.com

Share this post